ALOM 160 C

ALOM 160 C

ALOM 160 C is a base demulsifier in water solution to control demulsification leading to reduction of emulsions from high alkaline earth metal soaps in crude oils and reduction as a Naphthenate soaps dissolver-inhibitor, for crude oils and solids formed in emulsions and on pipes in oil production, in export tanks or upstream processing units and product streams and heat exchangers in the refineries. It will inhibit and destroy the ability to form tenacious emulsions, by a preferable reaction of alkaline earth metal ions on their way to form soaps and emulsions. ALOM 160 C can control the schematics and routes to the gum forming emulsified Naphthenates from Naphthenic acids in crude oil production. It will minimize the normal soap surfactants of alkali and alkaline earth metals, organic scales (especially useful for calcium soaps) in refinery heat exchangers.

ALOM 160 C will inhibit calcium from the calcium carboxylates found in some high calcium crude oils. ALOM 160 C can enhance desalting and demulsification by controlling the metals and the acids forming naphthenate emulsified soaps.

PRODUCT

A water based solution of a concentrated base of very low polymeric alkoxylated nonmetallic acid esters with amido compounds & complexation agent – stabilizer and special metals stabilizers

APPEARANCE

A water based light milky liquid

DENSITY at 15°C

1.02-1.05 Kg/Litre

pH ( 1 % Solution )

5.6

Pour Point

Water based

Closed Flash Point ( PMCC)

Water based

General Information

ALOM 160 C – will remove and control calcium from the emulsions due to calcium carboxylates found in the high calcium in crude oils. This product will also minimize the formation of the normal carboxylic soaps and naphthenic acids soaps emulsions in crude oils and other product streams, depending on the severity of the problem. Also synthesized in this base formulation are some surfactants-dispersants, which will finely disperse the naphthenate soaps inherent in crude oils from the formation from agglomerating, acting thus as anti-agglomerants for Naphthenate soaps.

ALOM 160 C – may be used to lower the real basic sediment values in crude oils. ALOM 160 C must be injected as far upstream as possible, at manifolds, upstream separators and desalters, even into high temperature heat exchangers and heaters. The best results occur when the chemical is injected via an atomizer quill system or pumping via notched quills. This allows good reactions with the acidic components in the multi-phased media at the highest temperature locations. The chemical contains a phase transfer molecule that effects good transfer of chemical amongst the phases. As it is a true inhibitor it will help the refinery process and reduce the huge cost of refining naphthenate crudes. The substantial savings this product can bring to the downstream and upstream markets are to be explored.

Treat Rates

ALOM 160 C –is recommended for use at a treat rate of 50 to 300 mg/l depending on the severity of the naphthenic acid concentration, concentration of inherent soaps and the degree of fouling control that is required. The chemical can be blended to improve economics to whatever activity is required.

PRODUCT APPLICATION

ALOM 160 C - The actual treat rate, optimized due to good mixing at high heat reaction points, will reveal the economics of the treatment. This chemical, as its water based, it can be winterized with glycols for cold weather storage and applications but it’s cost effective, in winter conditions, to inject this from lagged-insulated chemical tanks fitted with heaters and pumped through heated injection lines. The ALOM 160 C should be injected at the highest temperature available before the crude oil reaches the separators for optimum effectiveness. We have added surfactants-dispersants to prevent inherent precipitated deposits from agglomerating. It is essential to apply ALOM 160 C, along with main demulsifiers or blended with other bases to make an overall demulsifier package. Although ALOM 160 C is a base for blending it can be used separately.

b>ALOM 160 C - , a good demulsifier, for dehydration, in processes running carboxylic - Naphthenic acid crude oils.

PACKING

Ð ALOM 160 C – Is available in below Packing :-

V 180 Liters Plastic Drums

v 1000 Liters IBC Tanks

v 20000 Liters ISO Tankers

HEALTH INFORMATION

After skin contact wash immediately with soap and water and rinse thoroughly; if skin Irritation continues, consult a doctor. After eye contact the opened eye should be rinsed for 15 minutes under running cold water, and then a doctor must be consulted. Additional information concerning first aid is given in the Material Safety Data Sheet, which is available upon request.

STORAGE AND HANDLING

ALOM 160 C - should be stored in epoxy / phenolic lined polyethylene or SS containers.

ALOM 160 C - is stable for at least one year if stored at temperatures of between 5 and + 50 °C in the original sealed container.

When handling ALOM 160 C, protective gloves, tightly sealed goggles and protective work clothing should be worn. Use with adequate ventilation & keep containers closed to prevent product contamination. Additional information concerning fire fighting measures, transport information and regulations is given in the Material Safety Data Sheet, which is available upon request.

OUR STATEMENT

Ð The statements made in the above documents are correct to the best of our knowledge and belief. Alpha Omega Resolution Chemicals Pvt. Ltd., gives no warranty as to their accuracy and will not be responsible for any loss or expenses arising from use of these products