ALOM SCAV 100
ALOM SCAV 100 – a liquid version, non-toxic Hydrogen Sulphide and Mercaptan scavenger chemical: is a highly effective reactive sulphur scavenger for many sulphur species - Hydrogen Sulphide (H2S), Mercaptans (thiols, thiono), sulphides, disulphides, polysulphides, carbonyl sulphide and solid metal sulphides, including Iron Sulphides, Zinc Sulphides in crude oil and gas production systems, water systems and Refineries.
It can be used to scavenge Hydrogen Sulphide, Mercaptans, thiols, thiono Sulphurs, Sulphides e.g. mono, disulphides and polysulphides, in crude oils, naphthas, gasolines, kerosenes, bitumens and cracking processes. The product can be used in sweetening units, or gas treating units, packed in towers to scavenge Hydrogen Sulphide, Carbonyl Sulphides and Mercaptans.
ALOM Scav 100 is a non-toxic, highly cost effective scavenger chemical for reducing the concentration of dissolved and gaseous Hydrogen Sulfide (H 2S), metal sulphides (for example: iron, zinc) and Mercaptans sulphur, sulphides to polysulphides, thiols, thiono sulphurs in upstream oil and gas production systems, sour water strippers, waste water stripper-clean up and in downstream refineries in the crude distillation unit and integrated processes including the flows upstream caustic units, catalytic cracker and hydrotreater, and visbreaker product streams.
This reactive sulphur scavenger can be used to polish off the sulphurs from Hydrogen Sulphide and Mercaptans in the gasoline or fuels leaving the sweetening unit, amine towers
and the Merox units. In the upstream O&G industry, this scavenger chemistry is suitable for use down hole in wells and for continuous injection into production fluid streams (subsea or topsides).
It can be injected as a liquid dispersion into fluid (water, oil and mixtures of) and gas streams and can be used in encapsulated forms in wells and tanks, plus can be used in solid form on cartridges / Towers /Scrubbers in Refineries for product streams treatment.
This product will revolutionize the production of naphthenate crudes. As it is a true inhibitor it will help the refinery process and reduce the huge cost of refining naphthenate crudes. The substantial savings this product can bring to the downstream and upstream markets are enormous
ALOM Scav 100 23 Wet Crude Systems For best results, this scavenger product utilized, where heat is available e.g 55-80 C. It should be continuously injected into the production stream typically at dose rates of between 3 and 25 ppm, based on total fluids. The dose rate does depend upon both the target component to be scavenged (sulphides or Mercaptans or both) and on the sulphide and mercaptan content of the target stream. We predict 1 ppm mole of ALOM Scav 100 active matter will scavenge between 4-6 ppm moles of (H2S) and 3-5 ppm moles of mercaptans.
This can include injection subsea, injection into wellhead manifolds and even down hole injection via umbilicals.
- + 245 Liters Plastic Drums
- + 1000 Liters IBC Tanks
- + 20000 Liters ISO Tankers
v’ Best-in-class multifunctional non-toxic product that scavenges H2S, metal sulphides, sulphides to polysulphides, carbonyl sulphides and Mercaptans at high mole efficiencies.
v’ The product acts rapidly & forms soluble and dispersible by-products, depending on the target ranges of mercaptans, which can be filtered off and are inert & will not cause
problems in the refinery.
v’ A very cost effective solution.
v’ There is a patent pending on this scavenger chemical.
v’ This scavenger is a much safer solution compared to current ones (aldehydes, and triazines) & is significantly more environmentally friendly (much less toxic) than currently
accepted scavengers. The liquid product is a non-toxic, non-hazardous product. This is a “green” product compared with formaldehydes and the triazines.
v’ Product can be applied in various forms, including, i) dispersion injection, ii) use of pills (encapsulated forms) and iii) in solid support form columns / cartridges / towers (Like scrubbers).
v’ A winterized version of this scavenger is available for use also.
ALOM Scav 100 should be stored in epoxy / phenolic lined polyethylene or SS containers. ALOM Scav 100 is stable for at least one year if stored at temperatures of between – 10 and + 50 o C in the original sealed container. When handling ALOM Scav 100, protective gloves, tightly sealed goggles and protective work clothing should be worn. Use with
ventilation & keep containers closed to prevent product contamination. Additional information concerning fire fighting measures, transport information and regulations is given in the Material Safety Data Sheet, which is available upon request.
not be responsible for any loss or expenses arising from use of these products